& Restoration Line
A quick dry quality primer formulated without lead or chromate pigments. It meets CISC/CPMA 1.73A-2.75. It also provides a hard and resistant film that can be top coated with many conventional Finishes. Available in red or grey.
For industrial and commercial application on structural steel, equipment and tanks. Interior and exterior use.
VISCOSITY: 68-74 KU
DENSITY: 1.30 KG/L (+/-0.1)
VOLUME SOLIDS (+/- 3%): 44%
SOLIDS BY WEIGHT (+/- 3%): 66%
MATERIALS VOC G/L: 445
FLASH POINT: 18C
THEORETICAL COVERAGE: 850 Sq. Ft/Gal per 1 mil dry film
FILM THICKNESS: WET - 3.5 mils DRY - 1 mils per coat
DRYING TIME: To touch: 10 min. To hard: 1-2 hours @ 25C
Not for immersion services. Not for wood, or galvanized metal. Apply above due point.
Surface must be clean and dry. Free from oil, grease, was, dirt and residue from alkaline or acidic cleaners. Removal of loose rust, loose millscale, and loose paint by hand tool cleaning, power tool or commercial blast cleaning.
Conventional or Airless Spray system or dip.
Use P.B.I. Xylene/Mineral Spirits.
Up to 18 months in sealed container.
18.9 LTR. 200 LTR
See MSDS and product label.
All statements, technical information and recommendations for the use of this product are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed. In addition, design of application and conditions during and of installations are beyond the manufacturer's control. Before using, the user shall determine the suitability of the product for his intended use. The following is made in lieu of warranties expressed or implied: manufacturer's only obligation shall be to replace such quantity of the product that has proved to be defective. 11/99
© 2000 Protective Barriers Inc. All rights reserved