PBI - Protective Barriers Inc. 

Contact Us      

Home

Company Info

What's New at PBI

Products

Blending Services

Products

PBI Products In Use

Rustproofing

Construction and Restoration

Roofing

C-100 Caulking Cement

C-103 Roof Primer *Asphalt*

C-105 Roof Resaturant *Asphalt*

C-108 Aluminum Roof Coating Non-Fibrated *Asphalt*

C-109 Aluminum Roof Coating Fibrated *Asphalt*

C-130 W.R. 8 Water Repellent

Waterproofing

C-103 Roof Primer *Asphalt*

C-119 Crude Coal Tar

C-135 Cold Tar Creosote

Metal Protection

C-100 Caulking Cement

C-103 Roof Primer *Asphalt*

C-105 Roof Resaturant *Asphalt*

C-108 Aluminum Roof Coating Non-Fibrated *Asphalt*

C-109 Aluminum Roof Coating Fibrated *Asphalt*

C-120 Aluminum Paint

Concrete Protection

C-130 W.R. 8 Water Repellent

C-132 Kleer-O-Seal *solvent base*

Paints & Strippers

C-300 Quick Dry Metal Primer

C-310 Shop Primer

C-320 Farm & Factory Enamel

C-330 Traffic Marking Paint Federal Type 74

TakeOFF

 

Back to top

Exit

 

Construction & Restoration Line

Steel Primer

  C-300 Quick Dry Metal Primer

  Contact us  for MSDS

A premium fast-dry red or grey, rust-inhibitive phenolic modified alkyd metal primer. This primer has been formulated with non-toxic inhibitor pigments, free of lead and sulfur compounds, which makes it suitable for a mild acid environment. 

USES

For industrial and commercial application on steel to protect against atmospheric corrosion. Interior and exterior use. Premium high-build shopcoat primer. Fast-drying maintenance primer. Multiple application: Fencing, handrails, bracing, metal doors.

PHYSICAL PROPERTIES

    VISCOSITY: 68-74 KU

    DENSITY: 1.18 KG/L (+/-0.1)

    GLOSS: Flat

    VOLUME SOLIDS (+/- 3%): 33%

    SOLIDS BY WEIGHT (+/- 3%): 51%

    MATERIALS VOC G/L: 590

    FLASH POINT: 18C

    THEORETICAL COVERAGE: 600 Sq. Ft/Gal per 1 mil dry film

    FILM THICKNESS: WET - 3.5 mils DRY - 1-1.5 mils per coat

    DRYING TIME: To touch: 10 min. To hard: 1-2 hours @ 25C

LIMITATIONS

Not for immersion services. Not for wood, or galvanized metal. Apply above due point.

PREPARATION

Surface must be clean and dry. Free from oil, grease, was, dirt and residue from alkaline or acidic cleaners. Removal of loose rust, loose millscale, and loose paint by hand tool cleaning, power tool or commercial blast cleaning.

APPLICATION

Conventional or Airless Spray system or dip.

CLEAN-UP

Use P.B.I. Xylene.

SHELF LIFE

Up to 18 months in sealed container.

AVAILABILITY

18.9 LTR.         200 LTR 

CAUTION

See MSDS and product label.

Home

Company Info

What's New at PBI

Products

Blending Services

All statements, technical information and recommendations for the use of this product are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed. In addition, design of application and conditions during and of installations are beyond the manufacturer's control. Before using, the user shall determine the suitability of the product for his intended use. The following is made in lieu of warranties expressed or implied: manufacturer's only obligation shall be to replace such quantity of the product that has proved to be defective. 11/99

  2000 Protective Barriers Inc. All rights reserved