& Restoration Line
A highly effective watershed, formulated from state of the art materials, blended to ensure water resistance while allowing the surface to breath, eliminating costly repairs.
Use over concrete, block, brick, landscape stone, natural stone and bridges. Any where masonry is used above grade.
SOLIDS BY VOLUME: *****
WEIGHT PER GALLON: 10 lbs. (approx.)
COVERAGE: 300 sq. ft. per gal. (approx.) Depending on porosity.
DRYING TIME: 24 hours
TOUCH DRY: 2 hours (approx)
FIRM DRY: 16 hours (approx)
SERVICE TEMPERATURE: *****
APPLICATION TEMPERATURE: 10 degrees C
FLAMMABILITY: Wet...Flammable Dry...Burns
Avoid use near food or other susceptible products. Not for use below grade. Do not use in heavy traffic areas, on asphalt, tar, plastic, rubber or fabrics. Do not use over freshly painted or stained surfaces.
Clean all surfaces from dust, oil, dirt, grease and any other foreign matter. Wear protective gloves, glasses and clothing.
Stir well before using. Apply liberally over entire area by brush, roller or spray. Allowing product to absorb into surface. Do not dilute. Apply second coat if necessary.
Up to 12 months in sealed container. Do not allow to freeze.
3.78 LTR 18.9 LTR 205 LTR
Harmful if swallowed. Contents flammable. Take suitable fire precautions. Keep away from open flame. Keep containers covered when not in use.
All statements, technical information and recommendations for the use of this product are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed. In addition, design of application and conditions during and of installations are beyond the manufacturer's control. Before using, the user shall determine the suitability of the product for his intended use. The following is made in lieu of warranties expressed or implied: manufacturer's only obligation shall be to replace such quantity of the product that has proved to be defective. 11/99
© 2000 Protective Barriers Inc. All rights reserved