PBI - Protective Barriers Inc. 

Contact Us      

Home

Company Info

What's New at PBI

Products

Blending Services

Products

PBI Products In Use

Rustproofing

Construction and Restoration

Roofing

C-100 Caulking Cement

C-103 Roof Primer *Asphalt*

C-105 Roof Resaturant *Asphalt*

C-108 Aluminum Roof Coating Non-Fibrated *Asphalt*

C-109 Aluminum Roof Coating Fibrated *Asphalt*

C-130 W.R. 8 Water Repellent

Waterproofing

C-103 Roof Primer *Asphalt*

C-119 Crude Coal Tar

C-135 Cold Tar Creosote

Metal Protection

C-100 Caulking Cement

C-103 Roof Primer *Asphalt*

C-105 Roof Resaturant *Asphalt*

C-108 Aluminum Roof Coating Non-Fibrated *Asphalt*

C-109 Aluminum Roof Coating Fibrated *Asphalt*

C-120 Aluminum Paint

Concrete Protection

C-130 W.R. 8 Water Repellent

C-132 Kleer-O-Seal *solvent base*

Paints & Strippers

C-300 Quick Dry Metal Primer

C-310 Shop Primer

C-320 Farm & Factory Enamel

C-330 Traffic Marking Paint Federal Type 74

TakeOFF

 

Back to top

 

 

 

 

Exit

Construction & Restoration Line

Roof Coatings

  C-109 Aluminum Roof Coating
                   Fibrated 'Asphalt'

  Contact us  for MSDS

A decorative and reflective roof coating in a metallic aluminum colour. The combination of selected coating asphalt and aluminum flake imparts flexibility, excellent weathering characteristics and high solar reflectivity. Complies with CGSB 37-GP-42 TYPE II.

USES

A protective coating on smooth surface asphalt composition roofing where reflective or decorative qualities are desired. May also be used for coating metal roofing or siding.

PHYSICAL PROPERTIES

    COLOUR: ALUMINUM

    SOLIDS BY VOLUME: 47 % approx.

    WEIGHT PER GALLON: 10 lbs. (approx.)

    COVERAGE: 2 - 4 gals. per 100 sq. ft.

    DRYING TIME: *****

    TOUCH DRY: 4 hours (approx)

    FIRM DRY: 48 hours (approx)

    SERVICE TEMPERATURE: Minus 25 degrees C. to 75 degrees C.

    APPLICATION TEMPERATURE: Over 15 degrees C. preferred.

    FLAMMABILITY: Wet...Flammable Dry...Burns

LIMITATIONS

Avoid use in contact with foamed polystyrene insulation or similar materials that may be affected by solvents. To prevent slippage of coating on felt apply P.B.I. Heavy Duty *Asphalt* Roof Resaturant at approx. 1 gal. per 100 sq. ft.. Allow to cure before application of P.B.I. Aluminum Roof Coating.

PREPARATION

Metal - Surface must be dry, free from rust, oil, grease or other contaminants. Asphalt - Surface must be dry and sound, free from dust and dirt. Repair all cracks, holes or weak spots with P.B.I. Caulking Cement. Extremely dry or weathered surfaces should be resaturated with a coat of P.B.I. Roof Primer *Asphalt*. Allow to dry 4 hours before applying P.B.I. Aluminum Roof Coating Non-Fibrated *Asphalt*.

APPLICATION

Stir well before using. Apply by brush or spray equipment. Coat all seams and nail heads. Do not apply when rain is imminent or if any dew or condensation can be expected to form before full curing of the coating takes place. Moisture on the surface may cause a discolouration of product. Ensure asphalt coatings are well cured.

CLEAN-UP

Use P.B.I. CLEAN-UP.

SHELF LIFE

Up to 12 months in sealed container.

AVAILABILITY

3.78 LTR.         20 LTR         205 LTR        BULK - Tanker or Totes

CAUTION

Contains flammable solvents. Take suitable fire precautions. Do not allow smoking or welding in working area. Keep away from heat and open flame. Use in well ventilated areas. Keep containers covered when not in use. Avoid prolonged breathing of the vapour and repeated contact with the skin. Harmful if swallowed.

Home

Company Info

What's New at PBI

Products

Blending Services

All statements, technical information and recommendations for the use of this product are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed. In addition, design of application and conditions during and of installations are beyond the manufacturer's control. Before using, the user shall determine the suitability of the product for his intended use. The following is made in lieu of warranties expressed or implied: manufacturer's only obligation shall be to replace such quantity of the product that has proved to be defective. 11/99

  2000 Protective Barriers Inc. All rights reserved