& Restoration Line
A decorative and reflective roof coating in a metallic aluminum colour. The combination of selected coating asphalt and aluminum flake imparts flexibility, excellent weathering characteristics and high solar reflectivity. Complies with CGSB 37-GP-42 TYPE I.
A protective coating on smooth surface asphalt composition roofing where reflective or decorative qualities are desired. May also be used for coating metal roofing or siding.
SOLIDS BY VOLUME: 47 % approx.
WEIGHT PER GALLON: 10 lbs. (approx.)
COVERAGE: 2 - 4 gals. per 100 sq. ft.
DRYING TIME: *****
TOUCH DRY: 4 hours (approx)
FIRM DRY: 48 hours (approx)
SERVICE TEMPERATURE: Minus 25 degrees C. to 75 degrees C.
APPLICATION TEMPERATURE: Over 15 degrees C. preferred.
FLAMMABILITY: Wet...Flammable Dry...Burns
Avoid use in contact with foamed polystyrene insulation or similar materials that may be affected by solvents. To prevent slippage of coating on felt apply P.B.I. Heavy Duty *Asphalt* Roof Resaturant at approx. 1 gal. per 100 sq. ft.. Allow to cure before application of P.B.I. Aluminum Roof Coating.
Metal - Surface must be dry, free from rust, oil, grease or other contaminants. Asphalt - Surface must be dry and sound, free from dust and dirt. Repair all cracks, holes or weak spots with P.B.I. Caulking Cement. Extremely dry or weathered surfaces should be resaturated with a coat of P.B.I. Roof Primer *Asphalt*. Allow to dry 4 hours before applying P.B.I. Aluminum Roof Coating Non-Fibrated *Asphalt*.
Stir well before using. Apply by brush or spray equipment. Coat all seams and nail heads. Do not apply when rain is imminent or if any dew or condensation can be expected to form before full curing of the coating takes place. Moisture on the surface may cause a discolouration of product. Ensure asphalt coatings are well cured.
Use P.B.I. CLEAN-UP.
Up to 12 months in sealed container.
3.78 LTR. 20 LTR 205 LTR BULK - Tanker or Totes
Contains flammable solvents. Take suitable fire precautions. Do not allow smoking or welding in working area. Keep away from heat and open flame. Use in well ventilated areas. Keep containers covered when not in use. Avoid prolonged breathing of the vapour and repeated contact with the skin. Harmful if swallowed.
All statements, technical information and recommendations for the use of this product are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed. In addition, design of application and conditions during and of installations are beyond the manufacturer's control. Before using, the user shall determine the suitability of the product for his intended use. The following is made in lieu of warranties expressed or implied: manufacturer's only obligation shall be to replace such quantity of the product that has proved to be defective. 11/99
© 2000 Protective Barriers Inc. All rights reserved