PBI - Protective Barriers Inc. 

Contact Us      

Home

Company Info

What's New at PBI

Products

Blending Services

Products

PBI Products In Use

Rustproofing

Construction and Restoration

Roofing

C-100 Caulking Cement

C-103 Roof Primer *Asphalt*

C-105 Roof Resaturant *Asphalt*

C-108 Aluminum Roof Coating Non-Fibrated *Asphalt*

C-109 Aluminum Roof Coating Fibrated *Asphalt*

C-130 W.R. 8 Water Repellent

Waterproofing

C-103 Roof Primer *Asphalt*

C-119 Crude Coal Tar

C-135 Cold Tar Creosote

Metal Protection

C-100 Caulking Cement

C-103 Roof Primer *Asphalt*

C-105 Roof Resaturant *Asphalt*

C-108 Aluminum Roof Coating Non-Fibrated *Asphalt*

C-109 Aluminum Roof Coating Fibrated *Asphalt*

C-120 Aluminum Paint

Concrete Protection

C-130 W.R. 8 Water Repellent

C-132 Kleer-O-Seal *solvent base*

Paints & Strippers

C-300 Quick Dry Metal Primer

C-310 Shop Primer

C-320 Farm & Factory Enamel

C-330 Traffic Marking Paint Federal Type 74

TakeOFF

 

Back to top

 

Exit

 

Construction & Restoration Line

Caulking Cement

  C-100 Caulking Cement

  Contact us  for MSDS

A solvent type, asphaltic cement composed of asphalts, mineral fibre
and fillers. Formulated to provide weather resistance, flexibility and
ease of application. Dries to a tough elastic, water resistant sealer.
Complies with CGSB 37-GP-5M.

USES

Use as a sealant and caulking for weather proofing seams, joints and cracks. For repairing roofs, flashings, vents, copings, drainpipes, eaves, skylights and parapet walls. Also used for cementing down loose shingle tabs.

PHYSICAL PROPERTIES

    COLOUR: BLACK

    SOLIDS BY VOLUME: 75 % approx.

    WEIGHT PER GALLON: 11 lbs. (approx.)

    COVERAGE: 1/4" thickness, 150 lbs. per 100 sq. ft.

    DRYING TIME: *****

    TOUCH DRY: 4 hours (approx)

    FIRM DRY: 48 hours (approx)

    SERVICE TEMPERATURE: 85 C cured (upper limit)

    APPLICATION TEMPERATURE: Ambient

    FLAMMABILITY: Wet...Flammable Dry...Burns

LIMITATIONS

Avoid use where solvent odours may taint food or other susceptible products. Do not apply to wet surfaces.

PREPARATION

Surface must be sound, clean, dry and free from rust, loose paint, dust, dirt and grease. Prime extremely dry or dusty surfaces with a brush coat of P.B.I. Roof Primer *Asphalt*. Allow to dry before the application of the Caulking Cement.

APPLICATION

Apply by knife, trowel or gun, when sealing joints, seams or cracks. When repairing holes and weak spots, apply a 1/8 " coating over the repair area and 6 " beyond.

CLEAN-UP

Use P.B.I. CLEAN-UP.

SHELF LIFE

Up to 12 months in sealed container.

AVAILABILITY

4 kgs.         10 kgs.         20 kgs.          

CAUTION

Contains flammable solvents. Take suitable fire precautions. Do not allow smoking or welding in working area. Keep away from heat and open flame. Use in well ventilated areas. Keep containers covered when not in use. Harmful if swallowed.

Home

Company Info

What's New at PBI

Products

Blending Services

All statements, technical information and recommendations for the use of this product are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed. In addition, design of application and conditions during and of installations are beyond the manufacturer's control. Before using, the user shall determine the suitability of the product for his intended use. The following is made in lieu of warranties expressed or implied: manufacturer's only obligation shall be to replace such quantity of the product that has proved to be defective. 11/99

  2000 Protective Barriers Inc. All rights reserved