A black fluid type liquid, offering an environmentally friendly, effective corrosion inhibitor providing excellent protection with low VOC's.
Used to coat the frames and undercoat parts of automobiles, trucks, buses, recreational vehicles and farm equipment.
SOLIDS BY VOLUME: 32 % approx.
WEIGHT PER GALLON: 9 lbs. (approx.)
DRYING TIME: 2 - 6 hours.
TOUCH DRY: *****
FIRM DRY: *****
CORROSION RESISTANCE: Salt spray 600 hrs.+ at 2.5 mil. thickness
APPLICATION TEMPERATURE: *****
FLAMMABILITY: Does not burn
Black rust inhibitor is used for bottom side applications only. Do not store above 120°F or below 5 °F. Do not use as a primer under conventional paints.
Metal must be free from all dirt, oil and grease.
Apply product at film thickness of 2 - 4 mils.
Use P.B.I. Clean Up.
All rust proofing materials have shelf life as follows:
Water-based products:3 months when never frozen
1 LTR 3.78 LTR. 20 LTR 60 LTR 205 LTR
If ingested keep person warm, do not induce vomiting. Seek medical attention.
All statements, technical information and recommendations for the use of this product are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed. In addition, design of application and conditions during and of installations are beyond the manufacturer's control. Before using, the user shall determine the suitability of the product for his intended use. The following is made in lieu of warranties expressed or implied: manufacturer's only obligation shall be to replace such quantity of the product that has proved to be defective. 11/99
© 2000 Protective Barriers Inc. All rights reserved