A one coat, amber coloured, gel-like coating for the protection of metal against corrosion from salts and chemicals. The evaporation of the solvent, leaves a wax-like film which has self-healing properties enabling film to creep and protect freshly exposed areas.
To be used on frames and undercoat of automobiles, trucks, trailers, buses, off-road vehicles, tractors, farm equipment and recreational vehicles.
SOLIDS BY VOLUME: 30 % approx.
WEIGHT PER GALLON: 8 lbs. (approx.)
COVERAGE: 200 - 300 sq. ft. per gal. (approx.)
DRYING TIME: 2 - 6 hours.
TOUCH DRY: 2 hours
FIRM DRY: 24 hours
CORROSION RESISTANCE: Salt spray 1500 hrs.+ at 2.0 mil. thickness
APPLICATION TEMPERATURE: *****
FLAMMABILITY: Flash point 40° C (PMCC)
Will not adhere to dirty surfaces or silicones. Do not use as a primer.
Prepare metal surface. Remove all dirt, moisture, oil and grease.
Stir well. Apply by brush or spray. Apply a coat approx. 5 - 8 mils in thickness. Allow to dry 2 - 6 hours before exposing to wet road conditions.
Use P.B.I. Clean Up.
All rust proofing materials have shelf life as follows:
Water-based products:3 months when never frozen
1 LTR 3.78 LTR. 20 LTR 60 LTR 205 LTR
Flammable material. Use with adequate ventilation. Keep away from sparks and open flame. Contains petroleum type solvent. If accidentally swallowed, do not induce vomiting. Call physician immediately.
All statements, technical information and recommendations for the use of this product are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed. In addition, design of application and conditions during and of installations are beyond the manufacturer's control. Before using, the user shall determine the suitability of the product for his intended use. The following is made in lieu of warranties expressed or implied: manufacturer's only obligation shall be to replace such quantity of the product that has proved to be defective. 11/99
© 2000 Protective Barriers Inc. All rights reserved