PBI - Protective Barriers Inc. 

Contact Us      

Home

Company Info

What's New at PBI

Products

Blending Services

Products

PBI Products In Use

Construction and Restoration

Rustproofing

A-008 Wax Rust Inhibitor

A-015 Wax Oil Spray

A-202 Rust Mist 'Amber'

A-203 Rust Mist 'Black'

A-204 Sound Deadner

A-209 Never Drip Oil Spray

A-210 Brush-On Undercoating

A-215 Top-Side Rust Inhibitor 'Amber'

A-216 Bottom-Side Rust Inhibitor 'Black'

 

Back to top

 

 

 

 

 

Back to top

 

 

Exit

 

Rustproofing Line

Wax Rustproofing

  A-015 Wax Oil Spray

  Contact us  for MSDS

A rust proof coating, which gives long lasting rust proofing to motor vehicles. The coating consists of modified calcium sulfonate. This product is a dispersion of modified overbased calcium sulfonate, high melting point wax, oil and anticorrosive ingredients in very low odour mineral spirits (low aromatic).

USES

P.B.I. Wax Oil Spray is designed to provide an oily penetrating film which gives maximum crevice protection and water displacement when applied to automotive underbody and chassis structures, while providing sag and drip protection.

PHYSICAL PROPERTIES

    % NON-VOLATILE BY WEIGHT: 70 - 80

    VISCOSITY AT 25 DEGREES C: 2000 - 4000 cps

    BOILING POINT: >150 degrees C

    DENSITY: 0.89    

    FLAMMABILITY: Flash point 44 C (PMCC)

CLEAN-UP

Use P.B.I. Clean Up.

SHELF LIFE

All rust proofing materials have shelf life as follows:

Water-based products:3 months when never frozen
All other products: 6 months

AVAILABILITY

20 LTR           60 LTR         205 LTR

CAUTION

Flammable material. Use with adequate ventilation. Keep away from sparks and open flame. Contains mineral spirits. Prolonged breathing of vapors should be avoided.

Home

Company Info

What's New at PBI

Products

Blending Services

All statements, technical information and recommendations for the use of this product are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed. In addition, design of application and conditions during and of installations are beyond the manufacturer's control. Before using, the user shall determine the suitability of the product for his intended use. The following is made in lieu of warranties expressed or implied: manufacturer's only obligation shall be to replace such quantity of the product that has proved to be defective. 11/99

  2000 Protective Barriers Inc. All rights reserved